View previous topic :: View next topic |
Author |
Message |
Alan Smith Registered User
Joined: 10 Jan 2016 Posts: 90 Location: Littleborough, Lancashire
|
Posted: Tue Sep 11, 2018 11:54 am Post subject: Reliant Rialto Rear Axle |
|
|
Alan Farrer chose a Reliant Robin rear axle for his Ph1 rebuild (Magazine 131).
I think the Rialto rear axle might be the same, if anyone is interested in going down a similar route.
https://www.facebook.com/marketplace/item/1791766084205355/ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Howard Evans Registered User
Joined: 10 Apr 2009 Posts: 118 Location: Crewe
|
Posted: Fri Sep 14, 2018 6:25 am Post subject: Reliant Axle |
|
|
Based upon Alan's recommendations I'm going down the same route. I have made a drawing and Keith is performing the necessary welding activities on the axle casing.
I need to get some final adjustments made, but if anyone is interested I'd be happy to share the sketches and photograpgs of what's been done.
Thanks,
Howard _________________ Olympic PhII CTO 289B |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Alan Smith Registered User
Joined: 10 Jan 2016 Posts: 90 Location: Littleborough, Lancashire
|
Posted: Fri Sep 14, 2018 9:14 am Post subject: |
|
|
That sounds good Howard - it would be fantastic to see and hear how it was done and what you thought of the end result. Good luck with it. _________________ Phase 1R Olympic
MM 1098 Engine & Gearbox |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Howard Evans Registered User
Joined: 10 Apr 2009 Posts: 118 Location: Crewe
|
Posted: Wed Sep 26, 2018 7:02 pm Post subject: Reliant Axle |
|
|
Hello Alan,
Over the next couple of days I'll send you a copy of the drawing and a picture of the axle in its semi-finished state.
As I'm not sure how to send attachments via the Forum, would it be possible to Email me at j-h-evans@tiscali.co.uk and I'll do the necessary.
Regards,
Howard _________________ Olympic PhII CTO 289B |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Alan Smith Registered User
Joined: 10 Jan 2016 Posts: 90 Location: Littleborough, Lancashire
|
Posted: Thu Sep 27, 2018 8:24 am Post subject: |
|
|
Email sent.
Cheers Howard. _________________ Phase 1R Olympic
MM 1098 Engine & Gearbox |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|